The common Printer issues are not caused by one possibility but from experience, the errors often arise due to the interfere or IV drip stuck with the movement of the cartridge. To resolve Epson Tx121 Printer General Error you can follow the blog steps explained or otherwise connect to Epson Printer Support Team. The defect considered:
• General Error that Epson Printer shows a warning
• Green light or Power light goes off
• Red light is on
Few steps to fix the Epson Tx121 Printer General Error:
Step 1: The resolve is to install again the printer driver
Step 2: If your Epson printer has been changed using intravenous tubes, to check the movement of cartridge slang & head. It is necessary to ensure the movement is free & does not stop when your printer loading.
Step 3: The cartridge chip is dirty, the fix is to remove the cartridge from the head and clean the chip made of brass with a pencil eraser.
Step 4: Try deleting the cartridge & turn on the Epson printer, click the reset switch 1 time then attach the cartridge & stealth it reset 4 times.
Step 5: In order to reset the procedure you can press the red key 1x then cartridge will shift.
Further, if you have any problem or you need instant support, then get in touch with the expert by connecting to Epson Printer Support Phone Number. The qualified and experienced experts are present 24/7 to avail you with best solutions as well as give you the right direction to get your error fixed in no time.
